High product parts processing need to pay attention to what? Let's get to grips with the following:

First, the mechanical work before checking the movement of a part is not filled with grease, then start and check the clutch, brake system is not all normal, and will be CNC lathe aviation parts turn 1-3 minutes, mechanical problems are strictly prohibited operation.

Second, dismantle the die shell at first turn off the power, stamping machine movement unit stops operating, you can start installing, adjusting the die shell. After installation and adjustment, move the pump flywheel by hand to try to punch twice, check the left and right die shell is not symmetrical, correct, screws are not strong, wrapping the edge of the strip circle is not in the correct position.

Third, work to maintain a correct posture, to have sufficient spirit to deal with the work, such as the discovery of physical discomfort need to leave the post immediately, and reflect to the commander-in-chief. The actual operation as far as possible consciousness concentration, gossip is strictly prohibited, cooperate with each other, workers should not be in the annoyance, fatigue under the condition of the actual operation, to prevent the cause of stable production accidents, the operation of the stability coefficient. All employees before entering the position, check their own clothing is not in line with the work norms. It is strictly prohibited to wear flip-flops, high-heeled shoes and clothing that harms the stability factor, and wear a protective cap if you have long hair.

Fourth, mechanical work, it is prohibited to reach into the guide rail slider work area, is strictly prohibited without authorization to take, put the product workpiece. In the hardware mold to take, put the product workpiece as far as possible when the use of tools to meet the requirements. If you find the machinery has abnormal sound or machine equipment is not good, you should immediately turn off the power switch to check. After the machinery is running, one person should master the actual operation of the machinery, others can't press the electric construction or step on the knob switch plate, and the more they can't put their hands into the working area of the machinery or touch the moving part of the machinery without authorization.

Fifth, when off duty, should turn off the power transformer, and organize the post of the product output, trimmings and dirt, etc., to determine the working environment cleanup and stability coefficient.